2 | S | Serial | Acpi(HWP0002,0)/Pci(1 1) |
3 | P | VGA | Acpi(HWP0002,0)/Pci(4 0) |
Example
To change primary operating system console
Shell> | conconfig 2 primary | ||
CONSOLE CONFIGURATION |
| ||
Index | Status | Type | Device Path |
1 | NC | Serial | Acpi(PNP0501,0) |
2 | P | Serial | Acpi(HWP0002,0)/Pci(1 1) |
3 | S | VGA | Acpi(HWP0002,0)/Pci(4 0) |
Example
To disable a console
Shell> conconfig 3 off |
| ||
CONSOLE | CONFIGURATION |
| |
Index Status Type | Device Path | ||
1 | NC | Serial | Acpi(PNP0501,0) |
2 | P | Serial | Acpi(HWP0002,0)/Pci(1 1 |
3 | NC | VGA | Acpi(HWP0002,0)/Pci(4 0) |
Example
To enable a console
Shell> conconfig 3 on |
| ||
CONSOLE | CONFIGURATION |
| |
Index Status Type | Device Path | ||
1 | NC | Serial | Acpi(PNP0501,0) |
2 | P | Serial | Acpi(HWP0002,0)/Pci(1 1) |
3 | S | VGA | Acpi(HWP0002,0)/Pci(4 0) |
Use this command to deconfigure or reconfigure I/O components or settings.
Syntax
ioconfig <fast_init mps_optimize wol> <on off>
Parameters
<fast_init> | specifies device | connection policy setting | |
<mps_optimize> | specifies | PCIe MPS optimization setting | |
<wol> | specifies | system | |
<on off> | specifies to configure or deconfigure a feature or component |
Operation
The ioconfig file is used to retain information on system's I/O configuration across reboots. The ioconfig file is created by insf at install time; and is modified by insf, rmsf, and ioscan when devices are added or removed. The only purpose of the ioconfig file to maintain configuration information when the system is not running.
326 Utilities