Elo TouchSystems 1525L manual Viewing the List of Configured Devices WNT/2000/XP

MagTek Device Drivers for Windows

and MTD device will appear as COM7. The MICR+ device appears to the system as COM12 and has a friendly name : MICR+.) Two examples are shown:

mtcfg COM7 "IntelliPIN MICR Aux" "UsePort=AUX port on MICR+"

"FriendlyName=IntelliPIN AUX"

or

mtcfg COM7 "IntelliPIN MICR Aux" "UsePort=AUX port on COM12"

"FriendlyName=IntelliPIN AUX"

Viewing the List of Configured Devices (WNT/2000/XP)

Execute MTCFG with no command line arguments. If the above examples have been used, the displayed result will be:

port Conn. to	model	friendly name
COM5	MiniWedge	MiniWedge
COM6 COM1	Mini MICR RS-232	Mini MICR RS-232
COM7 AUX port on MICR+	IntelliPIN MICR Aux	IntelliPIN AUX

Using the MTCFG Utility (WNT/2000/XP)

MTCFG.EXE is a command-line utility installed with the MTD drivers. It requires that the driver binaries be correctly installed, as described in the previous sections. MTCFG cannot be used to install the driver binaries; running it from the installation media before the driver has been installed will result in the following error message:

Mag-Tek driver is not correctly installed. Please install the driver before using this program.

The same message will be displayed if the installation has been modified manually, e.g., the installation script has been renamed or removed or the driver’s Registry data has been removed.

It is recommended that all applications that may have opened a MagTek device be terminated before using MTCFG to change a device’s configuration, or to add or remove a device.

154