Configuring an m70L
After you select the picture source, most of the remaining setup is automatic, although you can override the automatic settings and adjust them manually.
The source picture - from computer, video, DVD player - is not always perfect in its size or resolution; it does not always conform exactly to a standard. The display can compensate for this.
You’ll find it easier to configure your displays when you perform the steps in the following order:
•Select the Source (Picture) (See "Selecting the Source" on page 25)
•Adjust the Input Levels (See "Adjusting Input Levels" on page 31)
•Adjust Frequency and Phase (See "Adjusting Frequency and Phase" on page 37)
•Select the Scale Mode (See "Scale Mode Settings" on page 39)
•Adjust the Sharpness (See "Sharpness Settings" on page 43)
•Check the Image Position (See "Adjusting Position" on page 45)
•Adjust Scaling and Cropping (See "Viewport" on page 47)
•Color Balance the display (See "Adjusting Color Balance" on page 49)
m70L Installation & Configuration Guide | 23 |
