Adjusting Position
Adjusting Position
Position moves the picture on the screen but does not move the menus.
Picture Position
Press the SIZE/POS button once on the remote to open the PICTURE POSITION menu. The four arrow keys move the picture on the screen.
Picture Position
Use arrow keys to move image
|
|
|
|
Horizontal Position | 168 | ||
Vertical Position | 19 | ||
|
|
|
|
The numbers for HORIZONTAL POSITION and VERTICAL POSITION
refer to the number of pixels from sync to the first displayed pixel. These numbers get smaller as the picture moves up and to
the left.
Horizontal Position
This number shows the number of pixels from the beginning of H sync to the first active pixel. Because there are many black pixels after H sync, this number will not be zero when the picture is at the left border of the screen.
Vertical Position
This number is the number of lines from V sync to the first active line, so it will not be zero when the picture is at the top of the screen.
Note: Adjusting the VERTICAL POSITION too far may cause the image to jump or hop. If the image appears to flicker or hop, readjust the VERTICAL POSITION.
m70L Installation & Configuration Guide | 45 |
