![](/images/new-backgrounds/1108064/10806453x1.webp)
Connecting Power
Connecting Power
The display typically draws 6.5A at 115V or 3.25A at 230V. For countries outside of North America, it is the responsibility of the installer to provide the power supply cord certified for use in the destination country.
Connect a power cable to the power supply and to an AC source. The power supply is
Note: Not for connection to
The AC Master switch is next to the power receptacle, both of which are located in the rear of the display.
Power receptacle and power switch location
About UPS Supplies
Some installations use a UPS - Uninterruptible Power Supply. Most UPS devices will work with the m70L. Review the power specifications of your UPS device to make sure it is compatible with the m70L.
m70L Installation & Configuration Guide | 19 |