Set up wireless (802.11) communication

Step 2: Test the wireless connection

To test the wireless connection and make sure it is working properly, complete the following steps:

1.Make sure the printer is turned on and paper is loaded in the tray.

2.On the printer control panel, press the (Wireless) button.

3.Using the buttons on the right, scroll to and select

Print Reports, and then select Wireless Test Report.

The printer prints a report with the results of the test. If the test fails, review the report for information on how to fix the problem and rerun the test.

For additional troubleshooting information, see “Wireless (802.11) setup problems” on page 23.

English

Change the connection type

After you have installed the HP software and connected the printer to your computer or to a network, you can change the connection type.

•To change from a wireless connection to a USB connection, connect the USB cable to the printer.

•To change from a USB connection to a wireless connection, follow the instructions for your operating system.

Windows

1.On the computer desktop, click Start, select

Programs or All Programs, click HP, select your printer name, and then click Printer Setup & Software.

2.Click Convert a USB connected printer to wireless.

3.Follow the display instructions to complete the setup.

Mac OS X

1.Open HP Utility. (HP Utility is located in the

Hewlett-Packard folder in the Applications folder at the top level of the hard disk.)

2.Click Applications on the toolbar.

3.Double-click HP Setup Assistant, and then follow the onscreen instructions.

19