Connection with Rear View Camera
Note:
¡Refer to the operating instructions for the connected devices, in addition.
CQ-VD6503N (Rear)
Rear View Camera
Control Unit (option)
English
16
8 m m M A X
F U S E 1 5 A
Camera Input 
Rear View Camera (option)
(Video)
(Yellow)
P
anaso nic
REVERSE
iPower Connector
Reverse Lead (Violet/white stripe)
(Video) |
|
(Yellow) | RCA Cord (option) |
Camera Input Terminal
(Yellow)
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must be connected.
Connect the reverse lead (violet/white stripe) to the positive (+) lead of the reverse lamp (the lamp with a clear lens that lights when the transmission gear is shifted into the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at the end. ¡Use a Reverse Extension Cord o if needed.
Reverse lamp
Clip connector (option)
Check the reverse lamp.
Take it out of the back of the tail lamp mount.
Battery | Car chassis |
|
oReverse Extension Cord (Violet/white stripe)
P
R
N
D
2 
L
Transmission gear
17
