Car Navigation System
Preparation:
¡Connect the Car Navigation System.
¡Specify the correct terminal that is connected to the car navigation system in the NAVI INPUT . (a page 20)
English
Car Navigation Mode Selection
Press [NAVI] to change to the car naviga- tion mode.
Press [NAVI] again to cancel.
To switch Operation Screen ON, press [ENTER] on the remote control.
Note:
¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is.
¡The volume of the voice guidance from the car naviga- tion system can be set. (a page 20)
¡Press [NAVI] after making sure that the power button on the main unit is set to on. Pressing [NAVI] allows the navigation mode to be activated even if the power button of the main unit is set to off, but operations may be different from those in other modes in this case.
¡The position adjustment of navigation screen shall be performed at the navigation unit side.
Connecting with Panasonic Car Navigation System (e.g.
Connect a Panasonic car navigation system to RGB connector.
PWR |
| |
SRC | ALBUM | |
| ||
| FOLDER | |
TA |
| |
VOL | TUNE | |
TRACK | ||
| ||
MUTE | NAVI | |
| ||
ASPECT |
| |
ASP |
| |
TILT |
| |
|
[NAVI]
14
15
