English
33
Settings (continued)
USER SCREEN AUDIO DVD INPUT/OUTPUT RADIO
DISPLAY UNIT
Display adjustment
TILT | (Tilt angle adjustment) |
1 
2 
3 
4 
5 
6
default: 1
CLOCK
Clock setting
DISPLAY | (Clock display) | ||
|
|
|
|
OFF | : clock display OFF | ||
|
|
|
|
ON | : clock display ON (“0:00” is displayed | ||
| before adjusting the clock.) | ||
|
| default: |
|
|
| OFF | |
|
|
|
|
CLOCK MODE | (Clock preference) | ||
RDS : the clock is automatically adjusted using the RDS clock time service func- tion. (a page 26)
MANUAL : manually adjusted time is displayed. default: RDS
HOUR ADJUST (Hour adjustment) ] : puts back hour
[ : puts forward hour
MINUTE ADJUST (Minute adjustment) ] : puts back minute
[ : puts forward minute
Note:
¡To start the clock, touch/press 
/[SRC]. ¡Set the Daylight Saving Time manually.
default: HOUR ADJUST: 0 MINUTE ADJUST: 0
ID-CODE
ID Code Setting
Prior to operating this unit, it is advisable to assign a 4- digit ID code for security. Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then
The ID code operation must be performed only by the person to whom the unit belongs.
Generally, it is not necessary to enter the ID code each time when using the unit if it has not been disconnected from the main power supply (car battery).
0 to 9 4 digits numeric code
default: none
How to set your ID code (for the first time)
qEnter an 4 digit ID code.
wEnter the same 4 digit ID code again.
How to change your ID code
qEnter the preset (old) 4 digit ID code. If the wrong ID
code is entered, a new ID code cannot be registered.
wEnter a new 4 digit ID code.
eEnter the new 4 digit ID code again.
How to cancel the known ID code
qEnter the preset (old) 4 digit ID code. If the wrong ID code is entered, it is not possible to cancel the ID code
function.
wTouch and hold 
until “COMPLETED!” is dis- played. The ID code cancelling procedure is completed. The unit now works without an ID code.
Note:
¡Should your unit ever require service, cancel your ID code before sending for repair.
¡The ID code setting cannot be eliminated even by the memory clear function.
¡The inputted code is not displayed for your security.
34
