Elo TouchSystems 1525L manual Property, Access, Description, cmdpendingLF, devstatusLF

MagTek Device Drivers for Windows

Property	Access		Description
c_write	R	1 if the device can encode a magnetic card in either LoCo or HiCo;
		2 if the device can encode a magnetic card in only the setting
		indicated in wr_coer
c_wr_secure	R	0 if the device does not support secure mode;
		1 if the device can switch between secure and non-secure mode
		(see wr_secure);
		2 if the device only operates in the secure mode.
capitalize	R/W	Set this to 0 to prevent the driver from capitalizing the data for the
		read and write commands. The default value for this property is
		1 (enable capitalization).
card_stat	R	Current card sensor status:
		0 = not blocked, 1 = blocked (PPINSERT).
chk_account	R	Check account number from check (MICR).
chk_amount	R	Check amount from check (MICR).
chk_bankid	R	Bank ID number from the transit field (MICR).
chk_data	R	Output data string as received from MICR reader (MICR).
chk_format	R/W	Indicates the format of the check data. Set to 6500 by default. If
		this property is modified by the application, the chk_xx properties
		(except chk_data and chk_status) will be set to null. (MICR)
chk_mod10	R	Mod10 check digit from the transit field (MICR).
chk_number	R	Check number (MICR).
chk_routing	R	Routing number from the transit field (MICR).
chk_status	R	2-digit status code from the check just read (MICR).
chk_transit	R	Transit number from check (MICR).
cmd_pending	R	Command pending–indicates which command, if any, is pending.
		If none is pending, the second argument will be null:
		/get	cmd_pending<LF>
dblpinentry	R/W	Set to 1 to enable double PIN entry such as when requesting a new
		PIN; set to 0 when verifying a customer’s PIN (IntelliPIN).
dev_status	R	Device status. 0 means device is connected and operational. Any
		other value indicates a device-specific error. If the device fails to
		respond, a null value is reported:
		/get	dev_status<LF>
dev_version	R	Device version string. This value is read directly from the device,
		if the device supports a version string. <CR> characters in the
		string read from the device will be replaced with /. This property
		will be useful in reporting operational problems to MagTek.
enable_cmc7	R/W	Set this property to 1 to enable CMC-7 characters decoding, 0 to
		disable it. This is used for international checks; see MICR manual
		for more information. (MICR)

98