La Crosse Technology WS-7014U Program Mode, Function Keys, II or 24 Hour Time Setting

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or either the IN or the OUT buttons are pressed during programming modes the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections III through VIII, you can advance to step 3 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I. FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD.

II.12 OR 24 HOUR TIME SETTING

1.Press and hold the SET button for 3 seconds, or until “12 h” flashes in the DATE LCD.

2.Press and release the CH button to toggle between 12 and 24- hour time.

3.Press and release the SET button to confirm the 12/24-hour setting, and to advance to Time Zone Setting.

III. TIME ZONE SETTING

The default time zone is EST, “-5hr” (Eastern Standard Time), to change this setting:

1.Press and hold the SET button for 3 seconds, or until “12 h” OR “24 h” flashes in the DATE LCD.

2.Press and release the SET button 1 more time to enter the Time Zone setting mode. The default Time Zone “-5” will flash in the DATE LCD.

7