Connections
Basic connection
1 Connect the FM indoor antenna (supplied) to the speaker unit.
Adhesive tape (not supplied)
FM indoor antenna (supplied)
2 Connect the AC mains lead after all other connections are completed.
AC mains lead (supplied)
To a household mains socket
≥After connecting the AC mains lead to the mains socket, wait for more than 15 seconds to turn on the Standby/on switch.
≥When this system is turned on, the CD unit and the speaker unit are connected wirelessly.
≥If this system is turned on immediately after connecting the AC mains lead, this system may turn off because the connection between the speaker unit and the CD unit has not been established. In that case, turn on this system again.
≥When this system is turned on for the first time after purchase, a message prompting you to connect a Bluetooth® device (“PAIRING”) is displayed. (l 16)
≥This system consumes a small amount of AC power (l 28) even when turned off.
≥In the interest of power conservation, if you will not be using this system for an extended period of time, unplug it from the household mains socket.
≥Tape the FM antenna to a wall or column in a position with
8the least amount of interference. (Use an FM outdoor antenna if radio reception is poor.)
8
Connect an external music device (for AUX mode)
Audio cable (not supplied)
1Plug the audio cable (not supplied) into the AUX jack.
Plug type: ‰3.5 mm stereo
2Press [
, AUX] to select “AUX” and start playback on the connected device.
To select the sound input level of the external device
1While in AUX mode, press [PLAY MENU] to
select “INPUT LEVEL” and then press [OK].
2Press [3, 4] to select “NORMAL” or “HIGH”.
≥ The default setting is “NORMAL”.
≥Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will distort the sound.
≥For details, refer to the instruction manual of the other equipment.
≥The cables and the devices are not supplied.
Connect the CD unit and the speaker unit with cables (optional)
If the CD unit and the speaker unit are not wirelessly connected, or the output sound is interrupted, connect the both units with two audio cables (plug type: ‰3.5 mm stereo, not supplied) as illustrated below.
≥We recommend you use cables of less than 5 m.
Audio cable (not supplied)
≥If the cables are connected, the displays show “WIRED MODE” and this system starts wired communication. This system automatically connects wirelessly when the cables are disconnected.
VQT4X66
