Attaching the speaker unit to a wall (optional)
The speaker unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg.
The screws and other items are not supplied as the type and size will vary with each installation. ≥Refer to step 2 of “Wall mount instructions” for details about the required screws.
≥Be sure to attach the fall prevention cord as a secondary safety measure.
Installation accessories
∫Supplied accessories
≥ 1 Safety holder ≥ 1 Screw
≥ 2 Wall mount brackets
∫Additionally required accessories
(commercially available)
≥4 Wall mount bracket fixing screws
≥1 Safety holder fixing screw
≥1 Fall prevention cord*
≥1 Screw eye
≥Keep the safety holder out of reach of children to prevent swallowing.
≥Keep the screws out of reach of children to prevent swallowing.
≥Keep the wall mount brackets out of reach of children to prevent swallowing.
*Use a cord that is capable of supporting over 33 kg (with a diameter of about 1.5 mm).
Wall mount instructions
Before installation, turn the unit off and disconnect the AC mains lead from the mains socket.
1 Measure and mark the position of the wall mount brackets (Both sides).
{.Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
12.5 mm
252 mm
Space required
Safety precautions
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM
300 mm
82 mm
67 mm
83 mm
122 mm
IMPROPER INSTALLATION OR INCORRECT HANDLING.
≥Be sure to install this unit as indicated within these operating instructions.
| 252 mm |
169 mm | 319 mm |
570mm
770 mm
26
26
VQT4X66
