Network settings
You can wirelessly stream music from an iOS device (iPhone, iPod, iPad), an AndroidTM device or a Mac/PC to this system’s speakers by using the AirPlay or DLNA feature.
To use these features, this system must join the same 2.4 GHz wireless network as the AirPlay compatible device (l 5) or the DLNA compatible device.
≥It is also possible to use AirPlay without a wireless network router. (l 14, “Directly streaming to this system (AirPlay)”)
Preparation
≥Place this system close to the wireless network router.
1 Turn this system on.
2 Follow the chart below to choose the network setting method.
Does your wireless network router
support WPS?
Yes | No / Do not know |
|
|
lright,
“Method 1”
Are you using an
iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Yes | No |
|
|
l 11, | l 12, |
“Method 2” | “Method 3” |
≥If you want to perform wireless setting with your Mac/PC, or you want to apply the
10advanced setting, try “Method 4” on page 12.
10
≥To cancel this setting in the middle, press [Í] to turn off this system.
≥Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions.
≥For up to date compatibility information on your wireless network router refer to http://panasonic.jp/support/global/cs/
(This site is in English only.)
Method 1
If your wireless network router supports WPS
∫Using the WPS Push Button Configuration (PBC)
The WPS identifier mark
WPS Push Button
Configuration (PBC) compatible wireless network router may have this mark.
1 Press and hold [s WPS] on the speaker unit.
{.“WPS” flashes on the display.
(The
≥Complete step 2 within 2 mins.
2 After “WPS” is indicated, press the WPS button on the wireless network router.
3 The settings are completed when “SUCCESS” is displayed and the
stops blinking and lights in blue.
“FAIL” may be displayed if the connection was not made within the set time limit. Try the setting again. If “FAIL” is still displayed, try other methods on page 11 or 12.
4 Press [OK] on the remote control to exit the setting.
≥To use the WPS PIN code, refer to the notes on page 13.
VQT4X66
