Control reference guide
This system consists of the CD unit and the speaker unit. The both units are wirelessly connected when turned on.
∫CD unit
Side view
∫Speaker unit
Top view
－VOLUME＋
9 |
8 |
11 |
10 |
8 11
13 |
2 | 12 | 5 |
1Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of power.
≥The CD unit and the speaker unit operate simultaneously. Press either standby/on switch to turn both units on or to standby mode.
Refer to page 23 when the units do not turn on simultaneously.
2Select the audio source
“CD”
^“IPOD_PORT” / “USB” ( “IPOD_DOCK”(b
3Basic playback control buttons
4iPod port for iPod/iPhone/iPad and USB devices (l 5, 9)
5Adjust the volume (0 (min) to 50 (max))
6Network setup button (l 11)
6
7 Standby/on indicator
While this system is turned on:
The indicator lights in green when the CD unit and the speaker unit are connected successfully, blinks in green when they are connecting, and lights in red when they fail to connect.
8Display
9Open the CD lid
10Dock for iPod/iPhone with Lightning connector (l 9)
11Remote control signal sensor
Distance:
Within approx. 7 m directly in front.
≥To avoid interference, please do not put any objects in front of signal sensor.
12WPS pairing button (l 10)
13
6
VQT4X66
