2 Attach the wall mount bracket to the wall with 2 screws (not supplied). (Both sides)
≥Use a level to ensure both wall mount brackets are level.
At least 30 mm
‰7.5 mm to |
‰9.4 mm |
‰4 mm |
Wall mount bracket |
3 Fix the safety holder onto the unit with the screw (supplied).
{.Screw tightening torque: 50 N0cm to 70 N0cm.
5 Hook the unit securely onto the wall mount brackets with both hands.
≥Connect the antenna and the AC mains lead to the unit before hanging the unit onto the wall. (l 8)
≥After hanging the unit, release your hands carefully to confirm the unit sits securely on the wall.
Wall | ENGLISH |
|
Screw (supplied)
4 Attach the fall prevention cord (not supplied) to this unit.
Cord
(not supplied)
6 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto the wall.
≥Refer to step 2 for requirements before screwing. Safety holder
Fixed to the wall
Safety holder fixing screw (not supplied)
7 Attach the fall prevention cord (not supplied) to the wall.
≥Make sure that the slack of the cord is minimal.
Screw eye (not supplied)
Cord (not supplied)
Wall
27
27
VQT4X66