Panasonic SC-NE5   stands for a number, Remote   stands for a number, Level j

“CANNOT ACCEPT”

≥The remote control cannot be operated due to a wireless communication problem between the CD unit and the speaker unit. (l 23)

“CANNOT SET”

≥Select an audio source other than “AIRPLAY” or “BLUETOOTH”.

“CHECKING CONNECTION”

≥This system is checking the connected iPod/iPhone/iPad.

≥If this display keeps appearing, make sure that the battery of the iPod/iPhone/iPad is not depleted and that the iPod/ iPhone/iPad is turned on and connected correctly (l 9).

“DL ERROR”

≥The software download has failed. Press any button to exit. Please try again later.

≥The server cannot be found. Press any button to exit. Make sure that the wireless network is connected to the Internet.

“ERROR”

≥Incorrect operation is performed. Read the instructions and try again.

“F ” (“ ” stands for a number.)

≥There is a problem with this system.

Note down the displayed number, disconnect the AC mains lead and consult your dealer.

“FAIL”

≥Updating or setting has failed. Read the instructions and try again.

“IPOD_DOCK OVER CURRENT ERROR” “IPOD_PORT OVER CURRENT ERROR”

≥The iPod/iPhone/iPad is drawing too much power. Disconnect the iPod/iPhone/iPad and turn this system off and on again.

≥The USB device is drawing too much power. Switch to “CD” mode, remove the USB and turn this system off.

“LEVEL 0”

≥There is no link between this system and the wireless network router.

Try the following operations:

–Check that the wireless network router is turned on.

–Turn this system off and on again.

–Reset the wireless network settings. (l 10)

If the problem persists, consult your dealer.

“NOCONNECT”

≥This system cannot connect to the network. Check the network connection. (l 10)

≥This system has a wireless communication problem between the CD unit and the speaker unit. (l 23)

“NODEVICE”

≥The iPod/iPhone/iPad device is not inserted correctly. Read the instructions and try again (l 9).

≥The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/iPhone/iPad and turn it on before connecting.

≥The USB device is not inserted. Check the connection.

“NO DISC”

≥Insert the disc to be played (l 9).

“NO PLAY”

≥A CD that is not in CD-DA or MP3 format is inserted. It cannot be played.

≥If there are more than 255 albums or folders (audio and non-audio), some of the MP3 files in these albums may not be read and played. Transfer these music albums to another USB. Alternatively, reformat the USB device and save these music albums prior to saving the other non-audio folders.

“NOT SUPPORTED”

≥You have connected an iPod/iPhone/iPad that cannot be played (l 5).

≥If the iPod/iPhone/iPad is compatible, turn it on and connect it correctly.

≥The connected iPod touch/iPhone/iPad is not connected to a wireless network. Connect it to a wireless network and try again. (l 10)

“READING”

≥This system is checking the CD information. After this display has disappeared, start operating.

“REMOTE ” (“ ” stands for a number.)

≥The remote control and this system are using different codes. Change the code on the remote control.

–When “REMOTE 1” is displayed, press and hold [OK] and [, AUX] for more than 4 seconds.

–When “REMOTE 2” is displayed, press and hold [OK] and [CD/RADIO] for more than 4 seconds.

“SET WI-FI”

≥The connected iPod touch/iPhone/iPad is not connected to a wireless network. Connect it to a wireless network and try again. (l 10)

ENGLISH

“LEVEL j”

≥When “D.CONNECT” is set to “ON” the Wi-Fi signal strength cannot be checked. To check the Wi-Fi signal strength from the wireless network router, set “D.CONNECT” to “OFF”.

(l 14)

“LINKING”

≥This system is communicating with the wireless network router to complete the network settings.

Depending on the wireless network router this process may take a few minutes. Try moving this system closer to the wireless network router.

25

25

VQT4X66