Troubleshooting
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions.
To return all settings to the factory preset
When the following situations occur, reset the memory of both the CD unit and the speaker unit:
≥There is no response when buttons are pressed.
≥You want to clear and reset the memory contents.
1Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2.)
2While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead.
≥Keep holding down [Í/I] until
3Release [Í/I].
All the settings are returned to the factory preset. You will need to reset the memory items.
Do you have the latest software installed?
≥Occasionally, Panasonic may release updated software for this system that may add or improve the way a feature operates. (l 21)
Common problems
The CD unit and the speaker unit are not wirelessly connected.
The sound is interrupted.
The standby/on indicator on the side of the CD unit lights red.
The display shows “NOCONNECT” or “CANNOT ACCEPT”.
This system has a wireless communication problem, follow the instructions below.
1Check that the AC mains leads are connected to the both units.
2If the devices which use 2.4 GHz are being used near this system, turn them off temporarily.
3Move the both units closer together.
A wireless connection will be automatically established.
≥If a wireless connection is not established, set the communication mode to “C.MODE1”. (l 22)
≥If the problem persists, connect the units with cables. (l 8)
Only the speaker unit’s display turns on.
≥Press any button on the CD unit, or select “CD”, “IPOD_DOCK”, or “IPOD_PORT” as an audio source.
Humming heard during play.
≥An AC mains lead or fluorescent light is near the cords. Keep other appliances and cords away from this system’s cables.
MP3 cannot be read.
≥You may not be able to play MP3 if you have copied a
≥When creating a
≥The amount of data on the disc is too small. Set the amount of data to above 5 MB.
| ENGLISH | |
≥ | Check the Bluetooth® device condition. | |
| Bluetooth® |
|
Pairing cannot be done. |
| |
The device cannot be connected.
≥The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again.
≥This system might be connected to a different device. Disconnect the other device and try pairing the device again.
The device is connected but audio cannot be heard through the speaker unit.
≥For some
The sound is interrupted.
≥The device is out of the 10 m communication range. Bring the Bluetooth® device closer to this system.
≥Remove any obstacle between this system and the device.
≥Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to the speaker unit and distance it from the other devices.
≥Select “MODE 1” for stable communication. (l 16).
Disc operations
Incorrect display or play will not start.
≥Make sure that the disc is compatible with this system. (l 5)
≥There is moisture on the lens. Wait for about an hour and then try again.
USB operations
No response when [1/;] is pressed.
≥Disconnect the USB device and then reconnect it. Alternatively, turn this system off and on again.
The USB drive or its contents cannot be read.
≥The USB drive format or its contents is/are not compatible with this system (l 5).
≥The USB host function of this product may not work with some USB devices.
Slow operation of the USB flash drive.
≥Large file size or high memory USB flash drive takes longer time to read.
The elapsed time displayed is different from the actual play time.
≥ Copy the data to another USB device or backup the data and | 23 | |
reformat the USB device. |
| |
23 | ||
| ||
|
|
VQT4X66
