Toshiba B-EX4 manual Online Mode LCD Display Example （English）

6. ON LINE MODE

6.2 ONLINE MODE LCD DISPLAY

EO18-33027

6.3 HELP DISPLAY

1.ONLINE MODE LCD DISPLAY EXAMPLE （English）

Printer	LCD Display	Display contents
condition
Online		← Model name, Version No. (*5)
		← Message
		← Printing page number (*1)
		← IP address etc. (*4)
		← Icon
Pause		← Remaining page number （*2）
		← Message
		← Error message 1st line
		← Error message 2nd line （*6）
		← Icon
Head open		← Remaining page number (*2)
		← Message
		← Error message 1st line
		← Error message 2nd line
		← Icon, Help guide （*3）

*The 1st, 3rd and 4th line of online mode display can be selected to display by the stting of system mode.

*Refer “Icon display” for Icon in detail.

(*1) The printing page number is reset to zero when the printer is turned on and is cumulated by each printing. If the cut interval issuing mode is selected, the page number is updated when paper is cut normally.

(*2) [Remaining number] = [Reserved number] – [Normal printed number when error occurs or pause] When remaining number is zero, it is not displayed. If the cut interval issuing mode is selected, the

remaining page number is updated when paper is cut normally. (*3) In help guide, only key is displayed if there is help message.

(*4) The message displayed in this area is an additional information like IP address, ribbon near end etc.

zThe IP address is not displayed when LAN/WLAN setting is disabled even though display setting is system mode is enabled.

zThe ribbon near end message is displayed when ribbon near end is detected regardless the setting in system mode.

The ribbon near end detection is to check the remaining size of ribbon. The diameter is 38mm for 3

6- 11