Toshiba B-EX4 manual Auto print Reflective / Auto Print Refl

5. SYSTEM MODE EO18-33027

5.6 TEST PRINT

5.6.9Auto print (Reflective) / AUTO PRINT (REFL.)

The test print for manufacturing is started by the following conditions. The parameter setting content and print density fine adjustment value are ignored.

—The following test print is started by press any key except [CANCEL] key after each printing.

—When [CANCEL] key is pressed, return to menu.

Movement contents	1 piece paper feed
	3-dot slant line print
	Barcode print
	Character print
Issue piece5 pieces each	5 pieces each
Print speed	203dpi：6”/sec
	305dpi：5”/sec
Sensor type	Reflective sensor
Print method	Thermal transfer
Issue type	Continuous issue
Label pitch	76mm
Print density fine adjustment value	±0

5-54