Using the remote control unit, +10 | JVC XV-501BK specification

Getting started

Using the remote control unit

You can operate the unit with the remote control unit, and you can also operate your TV or other components with the remote control unit.

To use the remote control unit for TV operation

You can operate a JVC TV with the remote control unit. To operate another manufacture’s TV, you have to change the remote control signal. Also refer to the manual supplied with your TV.

Changing the remote control signal

TV

1 Set DVD CATV on the remote control unit to TV.

TV

2Press and hold , then press SET . TVPOWER

Do not release	TV	POWER	until the next step is completed.
	POWER. Keep holding

Getting started

Manufacturer code list

No.	Manufacturer
01	JVC

02	MAGNAVOX

03	MITSUBISHI

04	PANASONIC

05	RCA

TV

3Holding POWER, enter the manufacturer’s code (two digits) using See the lists on the right to find the manufacturer’s code.

TV

4Release POWER.

The following buttons can be used for operating the TV (with TV):

0to 9 .

TV

DVD CATV set to

06	SHARP
07	SONY
08	TOSHIBA

09	ZENITH

10	HITACHI

11	PANASONIC

12	SAMSUNG
13	SANYO
14	SANYO
15	SAMSUNG

TV	Turns the TV on or off.
POWER

+	Changes the TV channels.
CH	Changes the TV channels.
–

+	Adjusts the TV volume.
TV	Adjusts the TV volume.
VOLUME
–

0 to 9	Selects the TV channels. +10 will function as the ENTER button if
and +10	your TV requires pressing the ENTER button after selecting a
	channel number.

CANCEL	You can switch input mode (either TV or VIDEO).
TV/VIDEO

CH RETURN	Returns to the previous channel. (only valid for JVC TVs)
10

TV

5Try to operate your TV by pressing POWER.

If your TV turns on or off, you have entered the correct code.

NOTE

¦If there is more than one code listed for your brand of TV, try each one until the correct one is entered.

23

Image 27

JVC XV-501BK Using the remote control unit, To use the remote control unit for TV operation, Manufacturer code list, +10

Contents

XV-501BK Mises en garde, précautions et indications diverses Supplied accessories Table of contents Playing a scene close-up Selecting preferences Limiting playback by childrenChecking the total disc time Features Changing the language and sound Using the instructions When you’re away Installation of the unitPower cord Avoid high temperatures Preliminary knowledge Front panel Names of parts and controls Rear panel Display window Remote control unit DVD/TV/CATV switch 23 Audio Volume buttonCancel button CATV/SAT Power button On-screen displays Display information DVD on-screen display during playback CD on-screen displayVideo CD on-screen display during playback To prevent the monitor from burning out On-screen guide iconsAbout invalid operation icon Preliminary knowledge about discs Playable disc typesPlayable discs Non-playable discs Disc construction Getting started Red ConnectionsBefore making any connections Yellow Video White Connect Y to Y, PB to PB, PR to PR To connect to an audio amplifier or receiver Connection to an audio amplifier or receiverRed White Audio cable Not supplied Amplifier or receiver White To connect to audio equipment with a digital input Turn on the unit To connect the power cord To install batteries in the remote control unit Precautions for the safe use of batteriesPrecaution To turn on/off the unit Power Manufacturer code list Using the remote control unitTo use the remote control unit for TV operation Changing the remote control signal Keep holding Power until the next step is completed Manufacturer’s code listSet DVD Catv on the remote control unit to Catv Press and hold Power Then press SET Do not release CATV/SAT Basic operations To turn on your TV and the unit Press Power to turn on your TVPress Power to turn on the unit Before operation Information about the opening display Inserting and removing discsTo insert or remove discs Press Close to close the disc tray Press Stop Playing back a DVD Video or CD discTo playback a disc from the beginning To stop playback completely Press To stop playback temporarilyTo locate the beginning of the scene or song Press Pause Unit starts playback from the stored position 7During stop modeResuming playback Press Resume To simulate the surround sound 3D Phonic Adjusting the surround soundPress to adjust the effect level Selected effect mode Numeric buttons are used to select a track or title number How to use numeric buttonsSummary of basic operations Press To select the subtitle language Subtitle To adjust the picture quality VFPTo playback a scene close-up Zoom To select a scene angle from the angle list display Use to select the desired item, then press Enter Playing a specific scene on a DVD discTo locate the desired scene from the menu Press Title you have selected is not contained in the disc When is displayed in the TV screenUse 1 to 10 , +10 to select the desired title number Unit begins playback from the selected title When the chapter number is incorrect in step When is displayed in the TV screen in stepTo return to the regular display To locate the desired scene by specifying the time When you make a mistake in step When appears in the TV screen in stepUnit starts playback from the selected time When you want to check more Use To selectDesired title Press Pause , then press SLOW+ Playing in slow-motionTo display still pictures Strobe To playback in slow-motion Slow Use to move the zoomed-in scene Playing a scene close-upTo playback a scene close-up Zoom Press Zoom Repeat playback To repeat a title or chapter RepeatUse to move to REPEAT, then press Enter To repeat a desired part A-B Repeat To cancel A-B repeat playback Use to move to Angle Viewing from multiple anglesTo select a scene angle from the on-screen display Angle Press Angle Press Angle or to select the desired angle Selected angle appears on the TV screen When appears on the TV screen in stepPress and hold Angle for more than 1 seconds Use to select desired angle Press Enter Changing the language and sound To select the subtitle language SubtitleUse to move to Subtitle To select the desired Selected audio number Use to move AudioUse to select desired audio language or sound Total number By pressing VFP or Processor on Front panel Adjusting the picture to suit preferencesTo adjust the picture quality VFP Press VFP or Processor on the front panel Setting and adjustment Press Stop to stop the unit Move to select the item you want to set by usingPress to select the setting you want Selecting preferences To set the language and display preference items Preference 1 can be set as followsSelected language French Selected languageEnglish Spanish On Screen Guide To set other preference items Preference 2 can be set as followsPlayback discs Output Lt/Rt L0/R0Audio is played back as it was recorded Picture gets dark ModePicture is scrolled Picture is not scrolled Auto standby function is off AV Compulink Mode Use to select the US for country code and press Limiting playback by childrenTo set Parental Lock for the first time Parental Lock Press Enter while holding down Stop To change the settings Parental Lock New setting is effectiveLevel, then use to select the parental lock level Enter your 4-digit password using 0 to To temporarily release the Parental lock Parental LockUse the to select YES or NO, then press Enter To playback only the beginning of each track Intro To select the time display mode Time Select To locate a desired track directly To locate a desired track using Next or PreviousSelect a desired track number using Playing a specific track on a disc Use to move to Time Search and press To locate a desired position by specifying the timeUse 0 to 9 to select Time minute and second then press Enter When you make a mistake in step Changing the track order To playback in the desired order ProgramPress Play to start program play Color of Random changes Random play begins Unit can play tracks in random order 7During stop modeTo playback tracks in random order Random Use to move to Random To repeat a current track or all tracks Repeat Use To moveTo quit repeat playback Use to move to A-B Press Enter at the endPart you want to repeat point B To stop Intro scan Sampling all tracksUse to move to Intro Color of Intro changes Each time you press Enter , the time mode changes as follows To select the time display mode Time Select CD Text Information about CD Text Audio CD operations Video CD operations Desired number of the item Playing a specific scene on a Video CDTo use the menu of the Video CD recorded on PBC Use During playback without the PBC function or stop mode To locate a disired track directlyDuring playback without the PBC function Use to move to Time Search and press Time search function does not work during PBC playback When you want to check more Scenes, press . Additional Use to select the desired trackUnit begins playback from the selected track Unit play the slowest speed, and each time you press Press Zoom To cancel zoom play You can program tracks during playback Press Stop Unit can play tracks in random order 7During stop7Random play begins To stop random play 7During playback without PBC function Use to move to Repeat To cancel A-B repeat To stop Intro scan Press Stop To playback only the beginning of each track Intro Selected of the picture quality tab lights up in yellow Adjusting the picture and sound to suit preferences Select the audio channels to be played back using To change the audio channel AudioSelected audio channel Total disc time appears on the TV screen Checking the total disc timeUse to move to Time Select Press Enter until Total Remain appears on the TV screen Connection and setup Operation Specifications Care and handling of discs Troubleshooting Even on label side How to handle discsMaintenance of discs Care and handling of discs Symptom Possible case Remedy Troubleshooting Connection and Setup AV Compu Link remote control system Operation Specifications Table of languages and their abbreviations Country code list for parental lock Page 1198FTYUBNPRI