Toshiba B-EX4 manual RF channel / RF Channel, ・ Auto, ・ 2CH ・ 3CH ・ 4CH ・ 5CH ・ 6CH ・ 7CH ・ 8CH

5. SYSTEM MODE

EO18-33027

5.11 RFID Module Setting

5.11.2.4RF channel / RF CHANNEL

It sets channel value of RFID write.

When the channel is set from 2CH to 8CH, the selected channel is used as fix.

When “AUTO” is selected, printer search available channel and set radio frequency to searched channel. The order of searched channel is below.

(2 -> 8 -> 6 -> 4 -> 3 -> 7 -> 5 -> 2)

This setting is applicable for all models. But this setting is most effective to B-SX704-RFID-U2-R（UHF for Japan） only.

・AUTO

・2CH

・3CH

・4CH

・5CH

・6CH

・7CH

・8CH

5.11.3 Retry / RETRY

The following information related retry setting is displayed.

・Position adjustment for re-issue / ADJ RETRY POSITION

・Retry number for re-issue / ISSUE RETRY LABELS

・Read retry / READ RETRY

・Write retry / WRITE RETRY

5.11.3.1Position adjustment for re-issue / ADJ RETRY POSITION

When RFID write error occur, printer feed and reverse tag by this setting distance and retry then retry EFID write. When “0 is set, retry is not performed.

The setting between -3mm and +3mm is ignored.

Max.	Min.	Step	Display	Sign	Integer	Decimal	0 fullfil	Unit
					digit	point
						digit
99	-99	1	Decimal	Non	2	0	Non	mm

5-77