Toshiba B-EX4 manual Rfid Analyze Tool, System Requirement

11. RFID ANALYZE TOOL

11. RFID ANALYZE TOOL

EO18-33027

11.1 Sstem Requirement

When an RFID module is installed, the printer will be able to write data on an RFID tag as well as print data on the surface of the RFID-tag embedded label.

To properly issue RFID tags, it may be necessary to adjust the RFID tag position so that it stops just above the antenna of the RFID module.

A proper adjustment value is obtained by using RFID Analyze Tool. It is different depending on the following conditions.

•RFID tag type

•The shape of RFID tag antenna

•Position of RFID tag embedded in RFID tag supply

•Variation of RFID module

The RFID Analyze Tool enables discovering an optimum tag position and output power of the RFID module for data read/write.

An adjustment value is stored in the printer memory by using a PC command or “UHF setting” parameter in the system mode (Section 5.11.4.)

11.1 System Requirement

System

IBM Compatible PC running Windows 2000 or Windows XP

Installed memory 16MB minimum (32M byte recommended)

Available hard disk space of 10M byte ore more

NOTE: Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.

Interface

Connect the printer to a PC with an RS-232C (Serial) interface or LAN interface.

Download

RFID Analyze Tool is downloadable from the following web site.

http://barcode.toshibatec.co.jp/Ris/products/barcode/support/en/index.php

11- 1