6. ON LINE MODE

EO18-33027

6.1 THRESHOLD SETTING

6.1 THRESHOLD SETTING

When a label is printed, the printer detects the gap between the labels using the transmissive sensor, and corrects the print position automatically to obtain a constant print position. However, when a preprinted label is used, some inks may prevent proper positioning correction. In this case, determine the transmissive sensor threshold manually by key operation and store the value in the non-volatile memory (EEPROM).

A constant print position can also be obtained when printing on a preprinted label since the print position is always corrected using the threshold stored in the non-volatile memory (EEPROM) by selecting “3: Transmissive Sensor (when using the preprinted label)” for the sensor type of the Issue Command.

When a label is printed by detecting the black mark on the back of the label, the reflective rate variation of a place other than the black mark may prevent the proper positioning correction. In this case, determine the reflective sensor threshold manually by key operation and store the value in the non-volatile memory (EEPROM).

A constant print position can also be obtained when printing on a tag since the print position is always corrected using the threshold stored in the non-volatile memory (EEPROM) by selecting “4: Reflective Sensor (when using a manual threshold value)” for the sensor type of the Issue Command.

Threshold Setting Operation Example English

[Online mode]

1.Normal condition

[Online mode]

2.Pause condition

[Threshold setting]

3.Paper sensor selection

[Threshold setting]

4.Wating paper set

[Threshold setting]

5. Calibration

[Threshold setting] 6a. Judgement: OK

Press [PAUSE] Key

↓Hold down [PAUSE] key for 3 seconds

Move cursor by

pressing [UP] Key and

[DOWN] Key

Press [ENTER] Key

Scroll display by

pressing [UP] Key and

[DOWN] Key

Press [PAUSE] Key

Continue paper feeding by keep pressing [PAUSE] Key

Depress [PAUSE] Key

Stop paper feeding by

 

 

 

depressing [PAUSE]

 

Key

 

 

 

 

Move to “3. Paper

 

 

sensor selection” by

 

 

pressing [FEED] Key

 

 

Move to “2. Pause

 

condition” by pressing

6- 8

Page 140
Image 140
Toshiba B-EX4 manual Threshold Setting Operation Example (English), Depressing Pause, Move to 3. Paper