Toshiba B-EX4 manual Rts/Cts+Xon/Xoff

11. RFID ANALYZE TOOL

EO18-33027

11.4 Operating Procedure

4.When the “CommSetting” screen appears, perform the serial port or LAN setting in accordance with the settings of the B-EX4T/EX6T printer.

Port: COM1 to COM9

Baudrate: 2400, 4800, 9600, 19200, 38400, 115200

Data bit: 8 bit

Parity: NONE, EVEN, ODD

Stop bit: 1, 2

Flow control: NON, XON, XON/XOFF,

RTS/CTS+XON/XOFF

Printer IP Address

Socket Port No.

NOTES:

1.Choose the port to which the printer is connected.

2.Choose “NON” for the Flow control of the RFID Analyze Tool. However, any flow control code of the printer is acceptable.

3.The data bit for the Analyze Tool is fixed to 8. Make sure the data length for the B-SX4T/SX5T printer is set to 8 bits.

4.The command flame for the Analyze Tool is “{ }”. Make sure the control code for the B-SX4T/SX5T printer is set to “AUTO” or “{ }”..

5.When the printer and the PC are connected via LAN, a printer IP address and socket port number need to be entered.

Default Printer IP Address: 192.168.10.20, Socket Port No.: 8000

11- 15