6. ON LINE MODE

Ex. 1[ESC]PC001;0A00,0300,2,2,A,00,B[LF][NUL]

 

Command error

LCD Display

 

Command error

 

PC001;0A00,0300,2,2,A

 

,00,B

 

 

EO18-33027

6. ON LINE MODE

Ex. 2[ESC]T20G30[LF][NUL]

Command error

LCD Display

Command Error T20G30

Ex. 3

[ESC] PC002;0100,0300,15,15,A,00,00,J0101,+000000000A,Z10,P1[LF][NUL]

LCD display

Command error

Command error

PC002;0100,0300,15,15

,A,00,00,J0101,+00000

(*2) When command error is displayed, the code except 20H-7FH, A0H-DFH are displayed as “?” (3FH).

(*3) When the ribbon near end detection is enabled, the error LED blinks 1Hz (50msec ON, 500msec OFF) during ribbon near end and condition is from No.1 to No.3.

(*4) The battery check is not work when resetting and RTC is not mounted.

(*5) It is necessary to set any following item to use RTC function at low battery condition.

1Turn off printer power from error condition, turn of printer by system mode, set date and time of RTC, reset printer, and change to online condition.

2Move to user mode by holding down [RESTART] key for 3 seconds, reset printer, set to online condition, and set date and time by command.

* It is possible to printer by setting date and time till turning off printer.

6- 7

Page 139
Image 139
Toshiba B-EX4 manual (Ex ) ESCPC0010A00,0300,2,2,A,00,BLFNUL, LCD Display, (Ex ) ESCT20G30LFNUL