Toshiba B-EX4 Reflect, Font, LATIN9, UTF-8, Code, Auto, Esc Lf Nul, Peel OFF Status, Feed KEY

5. SYSTEM MODE

EO18-33027

5.3 SELF-DIAGNOSTIC TEST

				ON	Perform back		feed	after
				REFLECT+Bfe	movement		of	ON
				ed	REFLECT.
				ON ALL+Bfeed	Perform back		feed	fter
					movement of ON ALL.
FONT	Character code selection			PC-850	PC-850
				PC-852	PC-852
				PC-857	PC-857
				PC-8	PC-8
				PC-851	PC-851
				PC-855	PC-855
				PC-1250	PC-1250
				PC-1251	PC-1251
				PC-1252	PC-1252
				PC-1253	PC-1253
				PC-1254	PC-1254
				PC-1257	PC-1257
				LATIN9	LATIN9
				PC-866	PC-866
				Arabic	Arabic
				UTF-8	UTF-8
	Font “0” selection			０	No slash used
				Ø	Slash used
CODE	Control code type			AUTO	Automatic selection
				ESC LF NUL	ESC LF NUL method
				{ }	{ } method
				×× ○○ ￿￿	Any set code (Described
					in hex. code)
PEEL OFF STATUS	Peel-off	wait	status	ON	Selected
	selection			OFF	Not selected
USB I/F STATUS	USB interface status			ON	Send
				OFF	Not send
FEED KEY	[FEED] key function setting			FEED	One label is fed.
				PRINT	Data in the image buffer is
					printed on one label.
KANJI	Kanji code type			TYPE1	For WINDOWS codes
				TYPE2	For original codes
EURO CODE	Euro code setting
AUTO HD CHK	Automatic	broken	dots	ON	Automatic	broken		dots
	check setting				check is performed.
				OFF	Automatic	broken		dots
					check is not performed.
WEB PRINTER	Web printer function setting			ON	Enabled.
				OFF	Disabled.
RIBBON NEAR END	Ribbon near end detection			30m	Ribbon near end state is
	setting				detected	when		the
					remaining ribbon length is
					approximately 30 m.
				70m	Ribbon near end state is
					detected	when		the
					remaining ribbon length is
					approximately 70 m.
				OFF	Ribbon near end state is
					not detected.
EX.I/O MODE	Expansion	I/O operation		TYPE1	Standard mode.
	mode			TYPE2	In-line mode.

5-9