6. ON LINE MODE EO18-33027
6. ON LINE MODE
6- 5
(except [FEED] key, Extended
I/O)
10 HEAD ERROR ● ○
A broken dot error has
occurred in the thermal head.
The error has occurred in the
head driver.
Yes Yes
11 EXCESS HEAD
TEMP ● ○ The thermal head temperature
has become excessively high. Yes Yes
12 RIBBON ERROR ● ○
An abnormal condition
occurred in the sensor for
determining the torque for the
ribbon motor.
The ribbon jam occurred.
The ribbon empty occurred.
The ribbon was not set.
Yes Yes
13 REWIND FULL ● ○ An overflow error has occurred
in the rewinder. Yes Yes
14
SAVING
####KB/&&&&KB
or
SAVING %,%%%.
%%%KB
○ ●
In writable character of PC
command save mode.
Yes
15
FORMAT
####KB/&&&&KB
or
FORMAT %,%%%.
%%%KB
○ ●
Initializing storage area.
Yes
16 NOW LOADING… ○ ● Downloading mode for
TrueTypeFont, BASIC Yes
17 MEMORY WRITE
ERR. ● ○
An error has occurred in
writing data into memory for
storage. (USB memory, flash
ROM on the CPU board)
No Yes
18 FORMAT ERROR ● ○
An erase error has occurred in
formatting memory for storage
(USB memory, flash Rom on
the CPU board)
No Yes
19 MEMORY FULL ● ○
Saving failed because of the
insufficient capacity of memory
for storage (USB memory,
flash ROM on the CPU board)
No Yes
20
SYNTAX ERROR
Command error
(Refer *1, *2)
● ○
A command error has occurred
in analyzing the command. Yes Yes
21 POWER FAILURE ● ○ A momentary power
interruption has occurred. No No
22 EEPROM ERROR ● ○ An EEPROM for back-up
cannot be read/write properly. No No
23 SYSTEM ERROR ● ○
When any abnormal
operations as below are
performed, a system error
occurs.
(a) Command fetch from
an odd address
(b) Access to the word
data from a place other than
the boundary of the word data
(c) Access to the long
No No