4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4- 1
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT WARNING!
1. Make sure to unplug the power cord before installing the optional equipment.
2. Be careful not to pinch your fingers or hands with the covers.
CAUTION!
When replacing parts or performing maintenance on the printer, be careful not to damage the print
head with a hard object like a watch or a ring.
Since the print head element can be easily damaged by shock, please treat it carefully by not hitting a
hard object against it.
The following optional equipments are provided for this printer.
B-EX204-QM-R: Disc cutter B-EX904-PK-QM-R: Narrow width platen kit
B-EX204-R-QM-R: Rotary cutter B-EX700-WLAN-QM-R: Wireless LAN I/F card
B-EX904-H-QM-R: Peel off module B-EX700-RTC-QM-R: RTC/USB host I/F card
B-EX904-R-QM-R: Ribbon Saving Module B-EX700-IO-QM-R: Expansion I/O card
B-EX700-CEN-QM-R: Parallel I/F card B-EX700-RS-QM-R: Serial I/F card
B-EX700-RFID-H1-QM-R: HF RFID module mount kit
B-EX700-RFID-U2-EU-R: UHF RFID kit for EU
B-EX700-RFID-U2-US-R: UHF RFID kit for US
B-EX700-RFID-U2-CN-R: UHF RFID kit for CN
In this section, installation procedures for these optional equipments are described.
Care must be taken not to allow the
metal or glass part of a watch to touch
the print head edge.
Care must be taken not to allow a
metal object like a ring to touch the
print head edge.