Toshiba B-EX4 manual On Line Mode

6. ON LINE MODE EO18-33027

6.1 THRESHOLD SETTING

The icon types to indicate judgement in judgement result display of threshold setting are below.

No.	Display	example	Icon name	Explanation
	（English）
1			OK(Mid.)	・Available to detect by paper sensor. Threshold
				value is middle.
2			OK (High)	・Available to detect by paper sensor. Threshold
				value is around peak.
				(The threshold should be adjusted around middle
				to detect paper correctly in reflective
				sensor/transmitive sensor fine adjust setting.)
3			OK (Low)	・Available to detect by paper sensor. Threshold
				value	is	around	base.
				(The threshold should be adjusted around middle
				to detect paper correctly in reflective
				sensor/transmitive sensor fine adjust setting.)
4			NG （1）	・ Not available to detect paper gap by paper
				sensor. Sensor adjustment is necessary.
5			NG （1）	・ Not available to detect paper gap by paper
				sensor. Sensor adjustment is necessary.
				(Threshold <= Base)
6			NG （2）	・Not available to detect by paper sensor.
				(The paper gap can be detected by calibration but
				is very difficult level.)

6- 10