Toshiba B-EX4 manual Factory test / Factory Test, Auto print Transmissive / Auto Print Trans

5.SYSTEM MODE

5.6.6White line print / NON-PRINTING The printer feed white paper.

5.6.7Factory test / FACTORY TEST

EO18-33027

5.6 TEST PRINT

5.6.8Auto print (Transmissive) / AUTO PRINT (TRANS.)

The test print for manufacturing is started by the following conditions. The parameter setting content and print density fine adjustment value are ignored.

—The following test print is started by press any key except [CANCEL] key after each printing.

—When [CANCEL] key is pressed, return to menu.

Movement contents	1 piece paper feed
	3-dot slan line print
	Barcode print
	Character print
Issue piece5 pieces each	5 pieces each
Print speed	203dpi：6”/sec
	305dpi：5”/sec
Sensor type	Transmissive sensor
Print method	Thermal transfer
Issue type	Continuous issue
Label pitch	76mm
Print density fine adjustment value	±0

5-53