Toshiba B-EX4 manual Test / Test, ID Read / ID Read

5. SYSTEM MODE

EO18-33027

5.11 RFID Module Setting

5.11.1 Test / TEST

The following item related test is displayed.

・ID Read / ID READ

5.11.1.1ID Read / ID READ

It changes to reading test mode and the printer read RFID tag. The printer perform reading test by pressing [ENTER] key. The reading data is displayed on LCD once RFID tag is read.

The error message is displayed on LCD if tag is not read.

Error content	English
No module or not available for communication /	MODULE TYPE ERROR
NO RFID MODULE
No country setting / RFID CONFIG ERR	COUNTRY CONFIG ERROR
Read tag is different from setting tag / RFID	READ ERROR
READ ERROR	Confirm Setting or
	set other Tag.
Not available / NOT AVAILABLE	NOT AVAILABLE
No response / NO RESPONSE	NO REPONSE
Time out / TIME OUT	READ TIMEOUT
	set a RF-Tag on Ant.
Other error / UNKNOWN ERROR	UNKNOWN ERROR

The only tag which is selected by RFID tag type setting can be read. If tag type is different from RFID tag type setting, RDID tag reading error is detected. Therefore select RFID tag type before this reading test.

・The display is 16 columns and 2 lines.

・Display example

English

・1st line data X/Y, X: Tag number for result, Y: Total tag number （Most of the case, only 1 tag is read.）

・If UHF module is used, “Performance/AGC” id displayed on the 2nd line by decimal. 5-74