Toshiba B-EX4 manual Centro, Lan/Wlan

5. SYSTEM MODE

EO18-33027

5.3 SELF-DIAGNOSTIC TEST

		2
PARITY	Parity selection	NONE
		ODD
		EVEN
CONTROL	Transmission control	XON/XOFF
	method selection
		READY/BUSY
		XON+READY
		AUTO
		XON/XOFF
		AUTO
		READY/BUSY
		RTS

2bit

Non parity. Odd parity. Even parity.

XON/XOFF protocol

(No XON output when the power is on, no XOFF output when the power is off)

READY/BUSY (DTR) protocol

(No XON output when the power is on, no XOFF output when the power is off)

XON/XOFF + READY/BUSY (DTR) protocol

(XON output when the power is on, XOFF output when the power is off) XON/XOFF protocol

(XON output when the power is on, XOFF output when the power is off)

RTS protocol

(No XON output when the power is on, no XOFF output when the power is off )

<< CENTRO >>

Item	Content
ACK/BUSY	Centronics	ACK/BUSY	TYPE1
	timing setting
			TYPE2
INPUT PRIME	Reset process	when the	ON
	nInit signal is ON		OFF
PLUG & PLAY	Plug-and-play	operation	ON
	setting
			OFF

Print value

The ACK signal is sent to match the rising edge of ACK signal and the falling edge of the BUSY signal.

The ACK signal is sent to match the falling edge of ACK signal and the falling edge of the BUSY signal.

Reset is performed. Reset is not performed. Plug-and-play operation is enabled.

Plug-and-play operation is disabled.

<< LAN/WLAN >>

Item	Content		Print value
LAN/WLAN	LAN selection	OFF		Disabled
		AUTO		Auto
		LAN		Wired LAN
		WLAN		Wireless LAN
SNMP	SNMP enabled/disable	ON		Enable
		OFF		Disable
PRTR IP ADDRESS	Printer IP address	***.***.***.***
GATE IP ADDRESS	Gateway IP address	***.***.***.***
SUBNET MASK	Subnet mask	***.***.***.***

5-12