Toshiba B-EX4 manual Other / Other, 11.5.1Tag test setting / TAG Check, Onaccess, Password

5. SYSTEM MODE

EO18-33027

5.11 RFID Module Setting

5.11.5 Other / OTHER

The following information related RFID is displayed.

・Tag test setting / TAG CHECK

・Multi word write / MULTI WRITE

・Carrier sense / CARRIER SENSE

	5.11.5.1Tag test setting / TAG CHECK
Disable / OFF		Disable error tag detection: Printer read tag before writing data to tag,
		but printer write data regardless the first data.
Enable(ID) / ON(ID)		Enable error tag detection: Printer reads tag before writing data (EPC
		area for Gen2 tag) to tag, and writing data if the first data is “A5A”.
Enable(Password)	/	Enable error tag detection: This is enabled for only GEN2 tag.
ON(ACCESS		Printer reads access password area before writing data to tag and
PASSWORD)		write data if access pass word matches to password setting.

To prevent unauthorized changes of the setting, a password to protect the error tag detection setting can be registered.

English Operation

The password input display is shown when protected password is enabled. The following explanation is for when protected password is enabled.

Input 4 digit protected password.

It is displayed when password setting is ON.

The setting display of error tag is shown when protected password is correct.

The error message is displayed and change upper display is shown when protected password is not correct.

Select tag test setting

・Disable

・Enable (ID)

・Enable (Password)

When “Disable” or “Enable (ID)” is selected, protected password is disabled and upper display is shown.

When “Enable (Password)” is enabled, access password input display is shown.

Input 8 digit accessible passwords

Set auto unlock password

・Disable / OFF

・Enable / ON

Set protected password.

・Disable / OFF

・Enable / ON

When “OFF” is selected, this menu is ended and the upper display is shown.

When “ON” is selected, protected password input display is shown.

Input 4 digit protected password.

5-83