Toshiba B-EX4 manual FEED1 ～ FEED4, Print, PRINT1 ～ PRINT4, Cut, Head U/D, Ribbon, Solenoid

5. SYSTEM MODE

Print condition:

Label length Print method Sensor type Speed

Issuing number Issuing mode Other

<< COUNTER >>

Item

Count condition

TOTAL FEED

EO18-33027

5.3 SELF-DIAGNOSTIC TEST

	490mm
	Setting by user
	Non
203dpi	6ips
305dpi	5ips
	1 piece
	Setting by user
	No mount winding motor

Content

Range

Total label distance covered (cannot be 0.0 ～ 3200.0 km cleared)

Counts when the paper feed motor are driven to feed a paper or print. (Counts also during a reverse

feed operation.)

When the power is off, the label distance of 50.0 cm or less may be rounded down and backed up.

FEED Label distance covered 0.0 ～ 3200.0 km

Counts when the paper feed motor are driven to feed a paper or print. (Counts also during a reverse

feed operation.)

When the power is off, the label distance of 50.0 cm or less may be rounded down and backed up.

FEED1 ～ FEED4	Label distance covered historical	0.0	～ 3200.0 km
The label historical distance.
PRINT	Print distance	0.0	～ 200.0 km

Counts while printing. (Counting is not performed during reverse feed operation.) B-EX4T1-G:

When the power is off, the print distance of 8.2 m or less is rounded down and backed up. B-EX4T1-T:

When the power is off, the print distance of 5.5 m or less is rounded down and backed up.

PRINT1 ～ PRINT4	Print distance historical	0.0 ～ 3200.0 km
The historical print distance.
CUT	Cut count	0 ～ 1000000

Every cut operation is counted.

When the power is off, a cut count of 31 or less is rounded down and backed up.

HEAD U/D Head up/down count 0 ～ 2000000

Counts head up/down operations using the ribbon saving solenoid. (Combination of up and down operations is counted as one.)

When the power is off, an up/down count of 31 or less is rounded down and backed up.

RIBBON Ribbon motor drive time 0 ～ 2000 Hour

Counts when the ribbon motor is driven to feed a paper or print. (Counts also during a reverse feed operation.)

For B-EX4T1-G:

When the power is off, a drive time of 32 seconds or less is rounded down and backed up. For B-EX4T1-T:

When the power is off, a drive time of 27 seconds or less is rounded down and backed up.

SOLENOID Head-up solenoid drive time 0 ～ 1000 Hour

Counts when the ribbon saving operation is performed. For B-EX4T1-G:

When the power is off, a drive time of 32 seconds or less is rounded down and backed up. For B-EX4T1-T:

5-6