Toshiba B-EX4 manual Icon

6. ON LINE MODE

EO18-33027

6.3 HELP DISPLAY

0 meter ribbon and the diameter is 43 mm for 70 meter ribbon.

(*5) The configuration of model name is below.

B-EX 4 T 1 - T
	Head resolution	G: 203dpi, T: 305dpi, H: 600dpi
	Type	1: Type1, 2: Type2
	Print method	T: Thermal transfer/Direct thermal
	Print width	4: 4” width, 6: 6” width
	Series model

(*6)) The ribbon near end message may be displayed in this line. The condition of display is same as *4.

2.ICON

Five kinds of icon are displayed in the lowest line of online mode display.

These icons are displayed in only online mode display.

Icon	Explanation
Wireless LAN icon	z It is used when wireless LAN module is mounted. It is not displayed
	when wireless LAN module is not mounted.
	z Graph shows the strength of radio wave.
	Graph 0: Out of range
	Graph 1: Strength of radio wave is weak.
	Graph 2: Strength of radio wave is middle
	Graph 3: Strength of radio wave is strong
Link icon	z It is used when wireless LAN module is mounted. It is not displayed
	when wireless LAN module is not mounted.

zIs displayed during wireless LAN communication.

zIt blinks during communication.

	OFF: No link
	ON: Link connection
	Blink: Roaming (*4)
Data receive icon	z It is displayed when printer has received data. It is turned on from
	the timing that printer receives the data from PC till printer
	completes to process received data.
	ON: Receiving data or Processing received data

6- 12