4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.4 RIBBON SAVING MODULE (B-EX904-R-QM-R)
4-20
4.4 RIBBON SAVING MODULE (B-EX904-R-QM-R) All the following parts are supplied with the kit. Make sure you have all items shown below.
NOTE: The ribbon saving module is standard on the B-EX4T series.
Solenoid (1 pc.) RSV PC Board (1 pc.) Solenoid Harness (1 pc.)
Cable Clamp (1 pc.) Locking Support (3 pcs.)
• Installation Manual (1 copy)
• SM-4x8 Screw (2 pcs.)
1) Remove the side panel (L) from the printer. (Refer to section 3.2.)
2) Remove the operation panel ass’y from the printer. (Refer to section 3.4.)
3) Fit the three locking supports into the RSV PC board.
RSV PC Board
Locking Support
Insulation Tape