Toshiba B-EX4 manual Back feed / Back ADJ, Max Min Step Display Sign Integer Decimal Fullfil Unit

5. SYSTEM MODE

EO18-33027

5.5 PRINTER PARAMETER FINE ADJUSTMENT

5.5.3Back feed / BACK ADJ

Max.	Min.	Step	Display	Sign	Integer	Decimal	0 fullfil	Unit
					digit	point
						digit
9.9	-9.9	0.1	Decimal	Exist	1	1	Non	mm
			+0.0mm

Print start position

(Home position after a back feed)

+3.0mm

Print start position

(Home position after a back feed)

-3.0mm

Print start position

(Home position after a back feed)

(*)There may be cases where a label is not returned to the home position depending on the print conditions, even if a back feed, of which the length is the same as the forward feed, is performed. In issues where any paper sensor is used, if the label pitch length is almost the same as the distance between the thermal print head and the paper sensors (75.5 mm), a label/tag may not be returned to the home position when operations with a back feed (such as cut issues, strip issues, automatic forward feed standby) are performed. It may result in an error. In such cases, to prevent an error from occurring, the back feed length should be increased by performing the back feed fine adjustment in the + direction.

5-43