Toshiba B-EX4 manual Disc Cutter B-EX204-QM-R, Hooker

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO18-33027

4.1DISC CUTTER (B-EX204-QM-R)

4.1 DISC CUTTER (B-EX204-QM-R)

WARNING!

Be careful not to injure your fingers when installing the cutter unit.

All the following parts are supplied with the kit. Make sure you have all items shown below.

Description	Q’ty/Unit
Cutter Unit	1
Cutter Cover	1
Cutter Harness	1
Print Head Cleaner	1

Description

Installation manual

Screw (M3x6)

Bush

Q’ty/Unit

1

2

1

1)Turn the power off and disconnect the power cord.

2)Open the top cover, and push up the hooker and take out the front cover bottom.

Front Plate

Hooker

3)Remove the three M3x6 screws from the side panel (L). Move the side panel (L) to the back and push up it to remove.

M3x6 Screw Side Panel (L)

M3x6 Screw

4- 2