Toshiba B-EX4 manual Strip position fine adjustment 0ｍｍ +3.0mm

5. SYSTEM MODE

EO18-33027

5.5 PRINTER PARAMETER FINE ADJUSTMENT

[Strip position fine adjustment]

0.0ｍｍ

+3.0mm

-3.0mm

4mm

3mm

▼

2mm

Printing in strip issue mode is stopped at the position where the distance from the middle point of the gap between labels to the end of the strip shaft is 4 mm, since the gap between labels is assumed to be 2 mm.

When the print stop position is not proper due to a greater gap, the print stop position should be adjusted using the strip position fine adjust function.

5-42