Toshiba B-EX4 manual Auto Diagnostics/AUTO Diagnostics

5. SYSTEM MODE

EO18-33027

5.3 SELF-DIAGNOSTIC TEST

5.3.2 Auto Diagnostics/AUTO DIAGNOSTICS

The printing procedure of “AUTO DIAGNOSTIC” of “DIAG.” is same as 「5.3.1 Counter,					Parameter/
MAINTENANCE COUNT」.
The manu layer from top menu of system mode to AUTO DIAGNOSTICS is below.
MENU ITEM
System Mode / SYSTEM MODE
	<1>Diagnostics / <1>DIAG.
		Auto Diagnostics / AUTO DIAGNOSTIC
			Print method / PRINT TYPE
				Thermal transfer / TRANSFR
				Direct thermal / DIRECT
			Cut setting / CUT TYPE
				Disable / OFF
				Enable / ON
			Print / CHECKING & PRINT

If error occur during printing, the error message is displayed, the error LED turns on and the onlineLED turns off. The erro can be canceled by [ENTER], [CANCEL] or [MODE] key, but printer did not perform re^printing.

•AUTO SELF DIAG. PRINT CONTENTS

PROGRAM	B-EX4T1-T
MAIN	XXXXXXXXX V1.0A:1A00
BOOT	XXXXXXXXX V1.0 :8500
HTML	XXXXXXXXX V1.0 :6100
FONT	5600
KANJI	NONE	:0000
	NONE	:0000
EEPROM	256B
SDRAM	32MB
SENSOR1	00000000,00000111
SENSOR2	[H]23 ﾟ C [A]22 ﾟ C
	[R]4.2V	[T]2.5V	[E]0.6V
HEAD	[RANK]7		305DPI
EXP.I/O	NG
EX.232C	NG
RFID	OK #00RV972 (EU0) R01
WLAN	OK Ver1.1.3
MAC	00-11-22-33-44-55
RTC	NG

USB MEMORY NG

BASIC M Z-SX4-MV10F. V1.0F:7479

BASIC S Z-SX4-SV10E. V1.0E:AD36

5-16