Toshiba B-EX4 manual „ Error messages, Cancel, Enter, Down

6. ON LINE MODE

EO18-33027

6. ON LINE MODE

[RESTART]	(1)	Resumes printing after a temporary stop of label printing or after an error.
	(2)	Places the printer in the usual initial state which is obtained when the power is
	turned on.
	(3)	Switches to user mode.
[PAUSE]	(1)	Stops label printing temporarily.
	(2)	Programs the threshold values.
[MODE]	(1)	Switches to user mode.
[CANCEL]	(1)	Clears the job.
[ENTER]	(1)	Displays help messages.
[UP]	(1)	No function.
[DOWN]	(1)	No function.
[LEFT]	(1)	No function.
[RIGHT]	(1)	Displays help messages.

.

„Error messages

NOTES: 1. If an error is not cleared by pressing the [RESTART] key, turn the printer off and then on.

2.After the printer is turned off, all print data in the printer is cleared.

3.“****” indicates the number of unprinted media. Up to 9999 (in pieces).

Error Messages	Problems/Causes
HEAD OPEN	The Print Head Block is opened in
	Online mode.
HEAD OPEN ****	Feeding or printing has been attempted
	with the Print Head Block open.
COMMS ERROR	A communication error has occurred.
CUTTER ERROR ****	The media is jammed in the cutter.
(Only when the cutter
module is installed on
the printer.)

Solutions

Close the Print Head Block.

Close the Print Head Block. Then press the [RESTART] key.

Make sure the interface cable is correctly connected to the printer and the host, and the host is turned on.

Remove the jammed media. Then press the [RESTART] key. If this does not solve the problem, turn off the printer, and call a TOSHIBA TEC authorised service representative.

6- 2