Toshiba B-EX4 manual Overview

5. SYSTEM MODE

EO18-33027

5.2 OVERVIEW

In System Mode, the keys function as described below.

Key	Compatible Key	Function
[MODE]	Non	Display top menu without saving setting.
[CANCEL]	[FEED] + [RESTART]	Display upper menu without saving setting.
[ENTER]	[PAUSE]	Display next menu.
[UP]	[FEED]	Move cursor up. Not move when cursor in the upset
		position.
[DOWN]	[RESTART]	Move cursor down. Not move when cursor is in the lowest
		position.
[LEFT]	Non	No function.
[RIGHT]	Non	No function

5.2 OVERVIEW

System Mode consists of nine main menus:

DIAG.	Perform self diagnostics test and print result, print head failure test.
RARAMETER SET	Set the parameter for each function of printer.
ADJUST SET	Adjust printer mechanism position and sensor.
TEST PRINT	Perform slant line printing, character printing and barcode printing.
SENSOR ADJUST	Display outer temaprature and head temparature and adjust each paper
	sensor.
RAM CLEAR	Clear maintenance counter and parameter.
INTERFACE	Set interface setting like network, USB, RS232C and parallel.
BASIC	Set the function of basic program when it is loaded printer.
FOR FACTORY	Set factory default.
RFID	Set RFID parameter.
RTC	Set date&time and time which is refrected for printing.
Z-MODE	Same as BASIC. It is not diplayed if the model is JA.
USB MEMORY	Load the firmware which is stored in USB memory and save information to
	USB memory.
RESET	Restart the printer.

5-2