4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.2 ROTARY CUTTER (B-EX204-R-QM-R)
4- 9
8) Fix the harness ass’y with the clamp.
9) Connect the 9-pin connector of the harness ass’y to CN15, and 2-pin connector to CN18 on the
Main PC board, respectively.
10) Turn the head lever counterclockwise to Free position.
11) Open the ribbon shaft holder plate.
12) Raise the print head block until it stops.
Main PC Board
CN15 (9 pins)
Harness Ass’y
Ribbon Shaft Holder Plate
Head Lever
Lock position (Label)
Lock position (Tag)
Print Head Block
Free Position