,QVWDOOLQJ￿D￿'LVSOD\￿8QLW

25 way D Type Connector

Connect the sleeve pin of the 3.5mm plug to the cable shield. Connect the other end of the shield to PIN 7 of the DB25 connector.

Connect the data-out signal from the display to the tip of the 3.5mm plug. Con- nect the other end to PIN 3 of DB25 connector.

Connect the data-in signal from the display to the centre ring of the 3.5mm plug. Connect the other end to PIN 2 of DB25 connector.

25 way D Type Connector

Pin 2 - Serial Out

Pin 7 - Ground

Pin 3 - Serial In

9 way D Type Connector

Connect the sleeve pin of the 3.5mm plug to the cable shield. Connect the other end of the shield to PIN 5 of the DB9 connector.

Connect the data-out signal from the display to the tip of the 3.5mm plug. Con- nect the other end to PIN 2 of DB9 connector.

Connect the data-in signal from the display to the centre ring of the 3.5mm plug. Connect the other end to PIN 3 of DB9 connector.

9 way D Type Connector

Pin 3 - Serial Out

Pin 5 - Ground

Pin 2 - Serial In

EN/LZT BS 102 063/S R2B

 

BusinessPhone Call Centre Supervisor - Standard

41

Installation Guide

Page 41
Image 41
Ericsson BusinessPhone manual QVWDOOLQJDLVSOD\8QLW, Way D Type Connector