Ericsson BusinessPhone manual 3RVW,QVWDOODWLRQ&RQILJXUDWLRQ, Dwdedvh&Rqiljxudwlrq

3RVW￿,QVWDOODWLRQ￿&RQILJXUDWLRQ

3RVW￿,QVWDOODWLRQ￿&RQILJXUDWLRQ

When the CCS has been installed, and before you run the CCS up for the first time, changes will need to be made to the system if you have not chosen the de- fault directories during installation.

If you have installed the Borland Database Engine and the CCS to the supplied, default directories, you may continue and start up the CCS for the first time.

'DWDEDVH￿&RQILJXUDWLRQ

In the CCS ‘Aliases’ are used when building path names for data files. An Alias is another name given to pre-set file paths names that the application uses. By using aliases changes to directory structures and directory names can be accommodated very easily. However, if the aliases have the wrong path name then the CCS will not be able to find data files and will not function.

When defaults are chosen during installation, the configured aliases which are also shipped will be correct. However, if you chose to change the directory in which the CCS is installed, you must set the Alias path names that are to replace the standard default settings. Changes to Aliases are carried out using the Bor- land Database Configuration Utility.

BusinessPhone Call Centre Supervisor - Standard
Installation Guide	28

EN/LZT BS 102 063/S R2B