Ericsson BusinessPhone manual 8SJUDGHDWDEDVHIURP&&69WR&&69, Start the Converting Program

$SSOLFDWLRQ￿6RIWZDUH￿,QVWDOODWLRQ

8SJUDGH￿'DWDEDVH￿IURP￿&&6￿9￿￿[￿WR￿&&6￿9￿￿[

Warning !!

CCS V2.x is NOT compatible with CCS V1.x data. You may not restore

CCS V1.x backed up data into CCS V2.x.

If you install CCS V2.x and you have an installed CCS V1.x on your Computer’s hard-disk, you should upgrade the CCS V1.x database. This is necessary for being able to use CCS V1.x data with CCS V2.x.

Note: You may choose to convert later. The conversion program is installed in the CCS\PROGRAMS directory, called CONVERT.EXE. If you have to reload the CCS data files for any reason you may wish to run the conversion again.

If you are performing a new installation or just upgrading a CCS system from V2.x you may click on No and proceed with the instructions “Re- start the System” on page 26.

Warning !!

Remember, you CANNOT run the conversion utility if version 2.x of the CCS has been run even once.

Start the Converting Program

Click the START button and conversion will start. This may take some time, a progress gauge informs you of how much has been done and how much is left.

BusinessPhone Call Centre Supervisor - Standard
Installation Guide	24

EN/LZT BS 102 063/S R2B