$GGLQJD1HZ'LVSOD\8QLW
%DXG5DWH
If adding a physical Display Unit you must set the Baud Rate for the transfer be- tween the PC and the new unit. The Baud Rate list shows all the supported Baud Rates for the type of Display Unit selected. The default rate will be highlighted. Select the required rate.
If you enter a Baud Rate that is different from the Baud Rates of Display Units already configured on the selected Comm Device, a warning dialog will be dis- played and you will be given the opportunity to either choose the existing Baud Rate or to set the rate for all Display Units on the Comm Device to the same new rate.
$GGUHVV
All Display Units must have an address which is unique for the COM or GUI de- vice they are connected to. Enter an address in the Address field. When adding physical Display Units, the address entered must match the actual setting of the Display Unit itself.
If you enter an Address that is already used by Display Units already configured on the selected Comm Device, a warning dialog is displayed and an unused ad- dress is entered in the Address field for you to accept.
&KDQJLQJ&RQQHFWLRQ3DUDPHWHUV
At times it may be necessary to alter certain connection parameters. Changing connection parameters is carried out via the Edit Display Unit Configuration di- alog which is accessed by highlighting the Display Unit to be edited in the grid and clicking the Edit button.
The Edit Display Unit Configuration dialog is similar to the New Display Unit Configuration dialog and enables you to edit Display Unit parameters. Remem- ber, however, that a Display Unit name cannot be edited once a Display Unit has been added.
EN/LZT BS 102 063/S R2B
| BusinessPhone Call Centre Supervisor - Standard |
47 | Installation Guide |
