Toshiba B-EX4 manual Menu operation procedure example

5. SYSTEM MODE

EO18-33027

5.3 SELF-DIAGNOSTIC TEST

•Menu operation procedure example

English

Procedure

Press [FEED] key and [RESTART] key when turning on the printer. Display 「System Mode / SYSTEM MODE」.

Select <1>Diagnostics/<1>DIAG.」 and press [ENTER] Key.

Display 「<1>Diagnostics/<1>DIAG.」 menu.

Select 「Counter, Parameter/MAINTENANCE CONT」 and press [ENTER] Key. Display 「Counter, Parameter/MAINTENANCE CONT」 menu.

Select 「Print method / PRINT TYPE」 and press [ENTER] Key. Display 「Print method / PRINT TYPE」 menu.

Setting printing method.

Display「Counter, Parameter/MAINTENANCE CONT」 menu by pressing [ENTER].

Press [DOWN] Key, select 「Cut type/ CUT TYPE」 and press [ENTER] Key. Display 「Cut type / CUT TYPE」 menu.

Setting 「Cut type / CUT TYPE」.

Display「Counter, Parameter/MAINTENANCE CONT」 menu by pressing [ENTER].

Press [DOWN] Key, select 「Print / CHECKING & PRINT」 and press [ENTER] Key. Print 「Counter, Parameter/MAINTENANCE CONT」.

Printing

Display “PRINTING”.

Normal printing

Display 「Counter, Parameter/MAINTENANCE CONT」 menu.

Print error occur

Display the error message and stop issuing. The error LED turns on and the online LED turns off.

Display 「Counter, Parameter/MAINTENANCE CONT」 menu by pressing [ENTER] Key or [CANCEL] Key.

The error LED turns off and the online LED turns on.

After recovery from error, printer does not start printing automatically.

5-4