6. ON LINE MODE

EO18-33027

6.3 HELP DISPLAY

RFID icon

z It is used when RFID module is mounted. It is not displayed when

 

RFID module is not mounted.

 

z It is ON when module is enabled and ready to communicate.

 

z It blinks when module is communicating and processing.

 

- The communication includes the one not related radio wave output.

 

- It blinks even though radio wave is not out after instructing radio wave

 

output to module.

 

(It blinks during pausing radio wave output or changing channel by the

 

influence of other carrier.)

 

 

ON: Module is enabled and ready to communicate

 

￿

Blinking: Communicating

Ribbon near end icon

z The ribbon near end is detected.

 

z It blinks when the ribbon is close to the end.

 

z The ribbon near end is detected by diameter of remaining ribbon.

 

The diameter is 38 mm for 30 meter ribbon and 43 mm for 70 meter

 

ribbon.

 

 

Blinking: Ribbon near end condition (*4)

3.ONLINE MODE DISPLAY TRANSITION, Operation example English

Idling or normal issuing

Press [PAUSE] Key during printing

Press [RESTART] Key, then resume printing if there is remaining data

Stop printing when printing

Open

head

 

 

during idling

 

Close head

 

 

 

 

Help guide is displayed since there is help message.

Press [RIGHT] Key

Help message for head open (*1)

6- 13

Page 145
Image 145
Toshiba B-EX4 manual Online Mode Display TRANSITION, Operation example (English)